Fits after modification — plan for sheet-metal work
Your G280626G802 has a replacement — with one honest catch.
Same 6,000 BTU/hr, same 230V. The mounting holes and air cutouts need adjusting to take the AT06RNSXX — routine sheet-metal work from our swap template, so the gasket seats properly. VoltAire's adapter plate is optional — your call.
Also sold as McLean · Hoffman · Pentair · nVent — G280626G802 — 6,000 BTU/hr · 230V · NEMA 4X · R-134A
Yours
G280626G802
Ours, in production
VoltAire AT06RNSXX
29.53″ H × 12.90″ D × 17.40″ W · 74.7 lbs
You'll order: 1× AT06RNSXX — $4,811. Plan on adjusting the mounting holes and air cutouts — VoltAire suggests working from the template.
Where distributors publish pricing for the nVent equivalent, VoltAire runs 48% less on average — 21–70% by model (sourced July 2026).
Your Replacement
AT06RNSXX
Fits After Modification6,000 BTU/hr • 230V • NEMA 4X
Your order total
$4,811
Unit price. Mounting + cutout modification in the field — template available.
Backed by VoltAire’s 12-month warranty (PDF) · UL 484 · Made in Orlando, FL
G280626G802
Where distributors publish pricing for the OEM equivalent, VoltAire runs 48% less on average (21-70% by model).
What You'll Order
Optional — your call. It isn’t needed for the fit; it makes the install easier. With or without it
Popular options
Screens sawdust, filings & insects off the condenser coil — not an enclosure air filter; cabinet air stays sealed.
Need a different voltage or capacity? Configure your AT04 / AT06 →
Built to Order • 4–6 weeks
Fit Details
Fits After ModificationSame cooling capacity and voltage as the G280626G802 — a solid match, just not bolt-for-bolt. Both the mounting pattern and the air cutouts need adjusting to take the VoltAire AT06RNSXX — routine sheet-metal work on a metal cabinet. VoltAire's adapter plate is optional here — your call, laid out below. VoltAire suggests working from the swap template so the mounting holes land right and the gasket seats with proper compression — that's what keeps water out. Call (844) 925-5668 if you'd like us to walk through it before you order.
Adapter plate: optional — your call
The AT06RNSXX goes in without a plate; the plate makes the install easier. VoltAire’s units hang on their mounting tabs, which rest on the bottom edge of the upper cutout while you start the bolts. On the G280626G802 that edge falls inside the existing opening, so there is nothing for the unit to hang on. That is the only reason VoltAire recommends the plate on this swap.
Without the plate — $4,811 unit only
- Have a second person, a lift, or a temporary cleat hold the unit while you start the bolts.
- Bolt a metal strip across the old opening at the height the tabs need, and behind any bolt the fit tool marks red.
- Cut, gasket and seal from VoltAire’s template as usual. If any mounting hole stays unused, confirm the seal with VoltAire first.
With VoltAire’s plate — +$405 (B0Z0044VAA)
- The plate gives the tabs a ledge to hang on and every bolt metal to bite — the easier hang, especially working alone.
- Made to order at VoltAire: 7–10 days, and your unit ships with it.
- Tick the plate in the order panel above to add it.
Either way, any cabinet metal the fit tool marks in red comes out — verify it against your actual cabinet before you cut.
Not sure? Talk to a fit specialist — (844) 925-5668.
G280626G802 replacement — common questions
What replaces the McLean G280626G802?
Will the VoltAire AT06RNSXX fit my G280626G802 cutout?
Do I need an adapter plate to replace the G280626G802?
How much does a G280626G802 replacement cost?
How fast can I get a replacement for my G280626G802?
Is the VoltAire AT06RNSXX an original McLean part?
Why switch to VoltAire?
Engineered Replacement
Same capacity, same voltage, NEMA 4 protection — with a clear fit path for your enclosure: direct, adapter plate, or template-guided modification. Built to replace McLean, Hoffman, Pentair, and nVent.
Built & Tested in the USA
Manufactured in Orlando, FL with a 5-point pressure and leak test. In-stock models ship fast from East Coast (VA) and Rocky Mountain (ID) warehouses; built-to-order configurations ship in 4–6 weeks.
48% Below Published Online Pricing, on Average
No distribution markup. Transparent pricing. Volume discounts at 4+ and 7+ units. Integrator pricing available for panel shops.
Need heat, stainless, 230V, or remote monitoring?
The AT04 is available with electric heat, stainless steel NEMA 4X, 48VDC, and factory ethernet controllers with Lead-Lag, SNMP, and BACnet.
Configure Your AT04 / AT06 →Related models
VoltAire Cooling is an independent party and is not affiliated with or endorsed by McLean, Hoffman, Pentair, or nVent. All competitor brand names and model numbers are the property of their respective owners and are used here for identification and compatibility purposes only.