Your N431216G060 has an adapter-fit replacement.
8,000 BTU/hr at 115V — the closest 115V option VoltAire builds. The capacity difference is spelled out below, in numbers.
Also sold as McLean · Hoffman · Pentair · nVent — N431216G060 — 11,000 BTU/hr · 115V · NEMA 4 · R-134A
Yours
N431216G060
43.0″ × 11.5″ × 14.0″ · 127 lbs
Ours, in production
VoltAire AN08RMWXX
36.00″ H × 15.77″ D × 11.63″ W · 96.4 lbs · 24% lighter
You'll order: 1× AN08RMWXX + 1× adapter plate — $4,377 total.
Verified fit path — so you're not the one explaining a wrong-fit order.
nVent published distributor price $11,162 → yours $4,377 $6,785 stays in your budget
Not a like-for-like — capacity step-down
Your N431216G060 is rated 11,000 BTU/hr at 115V. VoltAire doesn't build a 115V unit at that capacity. The closest 115V option, the AN08RMWXX, is 8,000 BTU/hr (about −27% cooling). If you can find a 115V 11,000 BTU/hr unit elsewhere, that's the true like-for-like — if you can't, this one fits with the adapter plate and runs on your voltage.
One more possibility: can your site take 230V? If an electrician can get you a 230V circuit, the AT12RNWXX gives you the full 12,000 BTU/hr at $4,548 — no capacity compromise. Call (844) 925-5668 and we'll help you weigh the two.
Your Replacement
AN08RMWXX
Adapter Fit · +$4058,000 BTU/hr • 115V • NEMA 4
−27% capacity vs your N431216G060 — the closest 115V option VoltAire builds. Not like-for-like.
nVent N431216G060 — published distributor price
$11,162 $6,785 stays in your budget (61% less)
Your order total
$4,377
Adapter plate included in this price.
Backed by VoltAire’s 12-month warranty (PDF) · UL 484 · Made in Orlando, FL
AllDataResource published price, Jul 2026. nVent sells through distributors and doesn't publish list prices — distributor quotes vary.
N431216G060
Where distributors publish pricing for the OEM equivalent, VoltAire runs 48% less on average (21-70% by model).
What You'll Order
Popular options
Screens sawdust, filings & insects off the condenser coil — not an enclosure air filter; cabinet air stays sealed.
Need a different voltage or capacity? Configure your AN06 / AN08 →
Built to Order • 4–6 weeks
Fit Details
Adapter FitSame 115V supply as your N431216G060 — but 8,000 BTU/hr vs your 11,000 BTU/hr (see the capacity note above). Cabinet cutout dimensions differ, so an adapter plate is required to bridge the mounting pattern between the existing opening and the VoltAire AN08RMWXX — so you're not fabricating a new opening. Plan on some fitting work during the swap; we'll spec the exact adapter for your installation at order review.
Unit dimensions — what the tape measure will tell you
| N431216G060 | AN08RMWXX | Δ | |
|---|---|---|---|
| Height | 43.0″ | 36.00″ H | -7.0″ |
| Width | 11.5″ | 11.63″ W | +0.1″ |
| Depth | 14.0″ | 15.77″ D | +1.8″ |
The green adapter plate covers the existing pattern and contains the VoltAire stamped openings; use the supplied plate for final dimensions, holes, gaskets, and cut locations. The two manufacturer drawings are centered on each other for visual comparison only, because a shared mounting reference between the two units has not been verified. Verify every opening against your actual unit before any cutting or mounting. This comparison is a visual guide, not a cutting or drilling template. Openings can vary with voltage and production run — verify against your actual unit before any cutting or mounting, and follow the manufacturer's installation template.
Not sure? Talk to a fit specialist — (844) 925-5668.
N431216G060 replacement — common questions
What replaces the McLean N431216G060?
Will the VoltAire AN08RMWXX fit my N431216G060 cutout?
How much does a N431216G060 replacement cost?
How fast can I get a replacement for my N431216G060?
Is the VoltAire AN08RMWXX an original McLean part?
Why switch to VoltAire?
Engineered Replacement
Matched voltage and NEMA 4 protection, with the capacity difference stated in plain numbers above — with a clear fit path for your enclosure: direct, adapter plate, or template-guided modification. Built to replace McLean, Hoffman, Pentair, and nVent.
Built & Tested in the USA
Manufactured in Orlando, FL with a 5-point pressure and leak test. In-stock models ship fast from East Coast (VA) and Rocky Mountain (ID) warehouses; built-to-order configurations ship in 4–6 weeks.
48% Below Published Online Pricing, on Average
No distribution markup. Transparent pricing. Volume discounts at 4+ and 7+ units. Integrator pricing available for panel shops.
Need heat, stainless, 230V, or remote monitoring?
The AN06 is available with electric heat, stainless steel NEMA 4X, 48VDC, and factory ethernet controllers with Lead-Lag, SNMP, and BACnet.
Configure Your AN06 / AN08 →Related models
VoltAire Cooling is an independent party and is not affiliated with or endorsed by McLean, Hoffman, Pentair, or nVent. All competitor brand names and model numbers are the property of their respective owners and are used here for identification and compatibility purposes only.